Sun CR-18 26 x 1-3/8 40-hole Polished Rim, fits EA-3/590 ISO Review

Customer Ratings:
List Price: $32.00
Sale Price: $23.56
Today's Bonus: 26% Off

If you are buying one of these CR18 rims you probably are upgrading to alloy rims on your 3-speed. You don't have many choices -either this or change the wheel size to something else like 700c or 650b. But you might have brake reach or fender clearance issues if you change to a different rim size.

The CR18 has the exact same ERD as the Raleigh 3-speeds and also many Schwinns that use the Sturmey Archer hub. This means you can re-use your old spokes and just swap rims over. This isn't really very hard either -just tape the new rim to the old one and loosen up the spokes without taking any all the way off. Then swap each spoke one by one over to the new rim. Make sure you have the spoke holes in the right orientation (L & R holes) and the rim "handedness" correct. Google Sheldon Brown's wheelbuilding page and it'll be made clear. If you are ordering new spokes you can measure your old spokes to know what size you need.

The stopping power of the CR18 over a steel wheel is considerably more confidence inspiring in the wet. The wheels will shed a few pounds too -which is rolling weight. The bike will seem lower geared in first because it starts that much easier.

Pros:

* Lightweight.

* Excellent wet braking power.

* Polished to look more like the chrome steel of old 3-speed rims.

* Drilled for Schrader valve so your 3-speed doesn't look funky.

* Well-made rim that trues up nicely.

Cons:

* Getting a 590 tire on this 590 rim isn't so easy. It's a bear -really, really tough actually. Have good tire levers ready (Pedro's, Park, or a Kool-stop tire jack.)

* This rim is narrower than what came on many old 3-speeds. Looks a little funky at first but you will get used to it. If you have a double-ended Raleigh cable you are going to have to figure out something since it won't tighten down far enough on the narrower rim.

* Ugly Sun-Riggle sticker that looks out of place on a vintage rim. Luckily it peels right off without too much fuss.

I bought a pair (40-hole for the rear and 32 hole for the front) for my '54 Raleigh. I liked them so much that I bought another pair for a '71 I am refurbishing.

40-hole rim fits the back wheel of older Raleighs with the Sturmey-Archer hub. Some newer Raleighs have 36f/36r so count your spokes!

Click Here For Most Helpful Customer Reviews >>

perfect for Raleigh and Schwinn 26" three speed wheel replacements. Mine were 32/40, and they came out gorgeous and improved braking 100%

Chicago Men's Rink Skate Reviews

Customer Ratings:

I am a 71 yrs young female. I purchased these "Men's" skates for myself. I bought a size larger and they are very comfortable. As an older "re" learner these skates worked out just great. The wheel's don't have speed, which is what I was looking for. They are indoor // outdoor skates. They work better for inside skating. A great price and a great quality skate. Especially for a beginner (the Wheels). No matter what age you are, these skates are the best. I love these skates.

Click Here For Most Helpful Customer Reviews >>

Comfortable, durable, good-looking skates, but I would recommend upgrading the bearings. They're a bit slow.

Best Deals for Chicago Men's Rink Skate

These skates are very comfortable... but within ten minutes the stopper had busted. No wonder this item is no longer being sold. :(

Honest reviews on Chicago Men's Rink Skate

These are a great pair of skates for the price. I purchased these skates for my husband, and he loves them. I would recommend these skates for either beginners or pros.

Find helpful customer reviews and review ratings for Chicago Men's Rink Skate

Chicago Men's Rink Skate

This is the 405 series. My opinion, if your a beginner then this is the skate for you. I did like the boot design. The bearings in the wheels are not that fast. The skate is more designed for those learning to skate. If you wanted to go with the skate for it's price, and if you want to upgrade the skate. You can switch to a better quality of precision bearings and I would recommend a new set a of wheels and you will get a better quality skate over the locale rental skates. Like I said it's great for beginners, I just sent mine back for the Chicago crs805. Both styles the crs405 and the crs805 are known as artistic skates in which you can preform different skate tricks. More advanced ones for the crs805. The bearings are faster and smoother for the crs805. The balance is great, trucks are stronger less wobble more skate control, and the leather binds more with the ankle.

ProForm 300 SPX Indoor Cycle Trainer Reviews

Customer Ratings:
List Price: $399.00
Sale Price: $226.07
Today's Bonus: 43% Off

I am writing this after having the bike for about a week and have been on the bike for about 3 hours total. It showed up quickly and was easy to assemble, about 20 minutes. The assembly is very straightforward, basically turning some screws to bolt on the legs, seat post, saddle, handle bars, etc. The bike is actually quieter than I expected. I generally ride in the early morning right across the hall from sleeping children and they haven't ever heard it. It is not silent but no bike I have ever ridden is. The saddle is like a typical road bike and I would recommend riding with a gel cover if your not used to that or wearing shorts with a chamois. I wish that the handle bars adjusted up just a little bit higher. I am 6' and I would prefer having the handle bars up probably one more notch. As it is now the position on the bike is pretty forward but I think it would only become unbearable if you were to try a lengthy ride over a few hours. So far I got exactly what I was expecting for the price point.

Click Here For Most Helpful Customer Reviews >>

Product was easy to assemble with an excellent manual. Parts are pretty heavy and Trainer should be assembled well away from pets, children, or furniture. It can slip and slide a little at times. It works smoothly and is quiet in operation. I have no problems hearing TV or music. Large rubber bands look like it should hold reading material across the handle bars. This I have not tried yet.

Best Deals for ProForm 300 SPX Indoor Cycle Trainer

If you want this bike I would suggest ordering it directly from Proform. As much as I love Amazon, this bike was delivered in the most damaged box, it was torn with huge gaping holes, taped up and almost falling apart. I still hoped that once I opened the box by some miracle the bike would be protected. Nope. I'm shocked anyone could deliver something this damaged and in such terrible condition. The bottom of the bike was dented, scratched and bent. It's hard to bend metal. This box looked like it had been dragged behind the delivery truck. It was just so terrible. I took pictures but can't upload them here. The box was really dusty too even after being shipped. MY husband thinks that it must have been in the warehouse forever. We did not even take the bike out of the box, there was no reason to. I'm not going to keep something that was already damaged either at the warehouse or during shipping. If it was sent from the warehouse this way, shame on them. If the delivery company did it, shame on them too. Did they think some flimsy tape all over the box would protect it. I'm sad I never got to even see the bike or try it out. But no sense in having my husband assemble something that is damaged only to take it all apart and ship it back. I emailed Amazon and they were great and they are having it picked up tomorrow and refunding my money. I'm too afraid to order another bike. I wanted this bike because I heard it was good and tried out the other bike on here (the more popular S brand bike) and two of them were defective in the wheels. No luck buying bikes here. Very disappointed. 3 strikes and I'm out. I really wanted to spin at home. Buyer beware on this one.

Honest reviews on ProForm 300 SPX Indoor Cycle Trainer

I am writing this review after owning the bike for a few weeks. The bike serves it's purpose well. It took me a bit to put it together, some parts needed some WD-40 persuasion to fit, but it seems like it will hold up and last. The only complaint I have is the saddle is very uncomfortable and when I say very uncomfortable, I mean like some kind of medieval butt torture device. I rode this and had trouble sitting down on anything afterwards. I even bought a gel saddle cover and it wasn't enough to improve the pain. I have purchased a saddle to replace it and can only hope it will solve the problem. Other than that, it works just fine, but I would definitely buy a better saddle from the beginning when buying this.

Find helpful customer reviews and review ratings for ProForm 300 SPX Indoor Cycle Trainer

I purchased this bike as a replacement for my older version as it was wearing out. The appearance is much nicer but the manufacturing was awful. The seat, handle bars, and the seat slider do not fit into the slots. I had to use a hammer in order to get them in and because of that I can barely adjust them when needed. The saddle does not tighten down enough to stay put. It ends up swiveling or shifting while I am riding. Also when I received the package and opened it the nobs to secure the handle bars were bashed in and broken as well as the frame was bent so I had to leave a washer out in order to tighten it to the stand. Overall I would not recommend this product. I think the other version is a lot nicer.